MS-P Basic Oxy/Acetylene Welding

  • 06/13/2019
  • 6:00 PM - 8:30 PM
  • Makersmiths Purcellville- 785 S. 20th Street Purcellville, VA 20132
  • 0


  • These are not members of Makersmiths.
  • These are members of Makersmiths, Inc.

Registration is closed

This basic Oxy/Acetylene welding workshop is hands on gas welding of steel. Learn Basic Oxy/Acetylene (gas) welding, puddle control, and filler rod technique. Oxy/Acetylene is the basis for all other welding techniques. If you learn to gas weld, you will be able to make strong functional welds using other welding equipment. In this class you will learn to gas weld, cut your own material, and make at least three different types of fusion weld. Basic torch technique, filler rod use, and welding of basic joints will be covered. Steel, filler rod, and welding rigs materials are provided. 

We have welding gloves but you must wear full coverage clothing. We have some welding goggles, but you may want to purchase your own, shade 4 or 5. 

Preferred pre-requisite: taken the BASIC basic welding course from Makersmiths (but not absolutely necessary). 

New to Makersmiths? Registrants must fill out the Waiver form at

The instructor is Jim Waldron. Contact him at

Come see us

Makersmiths Leesburg: 106 Royal St SW, Leesburg, VA 20175

Makersmiths Purcellville: 785 S. 20th St, Purcellville, VA 20132

Join us

Best way to join in is to just come on by.  

We have Drop-In Open Hours most Tuesday, Wedsnesday and Thursday nights from 7:00 to 9:00.  There'll be folks here to give you a short tour, show you around and tell you a bit more about Makersmiths.  Bring your ideas, parts, projects . . . whatever.  

                                               We're here to help!   :-)

Makersmiths is a 501(c) non-profit organization.  106 Royal St SW, Leesburg, VA 20175

Powered by Wild Apricot Membership Software